Materials Testing

Instrumentation

Description

Cost Per Hour (Industry)

Cost Per Hour (Academic/Gov't)

Hot Disk TPS2500S Thermal Conductivity System

The TPS2500S is transient absolute measurment of thermal conductivity, thermal diffusivity and specific heat from 0.005 to 1000W/mK. This instrument is designed for testing thermal transport properties of solids, liquids, paste and powders.

55.00

27.50

Perkin Elmer DMA8000

Dynamic Mechanical Analysis (DMA) is used to characterize materials' bulk properties such as modulus, compliance and damping (tan delta). It measures changes of rheological behavior under dynamic conditions as a function of temperature, time, frequency, stress, atmosphere, or a combination of these parameters. Stress-strain, creep recovery, thermomechanical and stress relaxation measurements are examples.

55.00

27.50

TA Q200 Digital Scanning Calorimeter

The Q200 is a versatile, research-grade DSC with our patented Tzero technology with temperature range of ambient to 725C.

61.00

30.50

TA Q500 Thermogravimetric Analyzer

Thermogravimetric analysis is capable of thermal analysis in which changes in physical and chemical properties of materials are measured as a function of increasing temperature or as a function of time.

61.00

30.50

Cascade REL-4800 Manual Probe Station

This is manual wafer load probe station with 200mm vacuum chuck. It also includes 5 vacuum connections for manipulators on each side with motic PSM-1000 microscope.

Contact for

pricing

Contact for pricing

Princeton VeraSTAT4 Potentiostat/Galvanostat

VeraSTAT4 is capable of performing a range of electrochemical applications. It has improved low current performance with fA

resolution and pA accuracy. The maximum current is up to 1A. With the internal frequency response analyzer, it provides impedance analysis over the frequency range 10Hz to 1MHz.

Contact for

pricing

Contact for pricing

Hysitron TI 950 Nanoindenter

The TI 950 TriboIndenter nanoindenter is an automated, high throughput instrument to support nanomechanical and nanotribological characterization over the nano and microscales. The instruments also enables High Precision Scanning Probe Microscopy.

70.00

35.00

The service rate (staff labor) is $100 per hour for external for-profit organizations (industry) and $50 per hour for internal and external non-profit organizations (academic/government).  All charges for service and for instrumentation are rounded to the nearest quarter hour.